Oxify – Mould, Musty Smell & Formaldehyde Treatment in 30 Minutes

Stop Climbing, Spraying and Repainting the Same Mould Again

Mould on ceilings, bathrooms and damp corners is frustrating.

Most people climb a ladder, spray strong chemicals directly onto the mould, wipe what they can reach, and repaint the stained area. For a while, it looks clean. Then the musty smell comes back. The stain returns. The mould appears again.

That is because spraying and repainting usually only treat what you can see.

Oxify is designed to treat the surrounding space, not just the visible patch.

When activated, Oxify releases powerful oxidizing actives into the enclosed area. These actives circulate through the room to help reach ceiling zones, walls, damp corners and hard-to-spray areas, neutralizing mould-related odours, stale air, formaldehyde and VOCs at the source.

No direct overhead spraying.
No wet chemical residue.
No masking the problem with paint.

Just activate, place and let Oxify work in 30 minutes.

Also Useful for New Furniture, Renovation Smell and Formaldehyde

New cabinets, wardrobes, flooring, laminates, adhesives and renovation materials can release chemical smells into the air.

This is often caused by VOCs, including formaldehyde, which may continue to off-gas from new materials over time.

Oxify helps by releasing oxidizing actives into the enclosed space. These actives help break down formaldehyde, VOCs and chemical odours in the surrounding air, making it useful for newly renovated rooms, wardrobes, cabinets, cars and enclosed spaces.

For best results, use Oxify together with good ventilation and repeat treatment where the source continues to release odours.

Why Oxify Works Better

Sprays only treat where you can reach

Ceiling mould and high wall corners are difficult to spray safely and evenly. Oxify releases oxidizing actives into the enclosed space, helping to reach upper areas, corners and mould-prone zones without direct overhead spraying.

Painting only hides the problem

Paint can cover the stain, but it does not properly treat the mould-prone environment underneath or around it. If the surface is still damp or contaminated, mould can return and the paint may peel.

Air fresheners only mask chemical smells

Perfumes, charcoal bags and air fresheners may reduce smell temporarily, but they do not actively break down formaldehyde or VOCs in the air. Oxify is designed to oxidize and neutralize these pollutants instead of simply covering the smell.

Oxify treats before you repaint or move in

Use Oxify before repainting mould-affected areas, or before occupying newly renovated rooms. It helps neutralize mould-related odours, stale air, formaldehyde and VOCs first, giving the space a cleaner starting point.

Helps reduce recurrence

Mould often comes back because of moisture, poor ventilation and untreated contamination. Oxify helps reset the enclosed space. For longer-lasting results, combine Oxify treatment with proper drying, ventilation and moisture control.

How Oxify Works

Oxify works through oxidation.

When activated with water, Oxify releases controlled oxidizing actives into the surrounding air. These actives circulate through the enclosed space and come into contact with mould-prone surfaces, musty odours, formaldehyde and VOCs.

In simple terms, Oxify helps break down the compounds linked to mould, mustiness, stale air and chemical odours.

It does not just cover the smell.
It does not just bleach the stain.
It helps attack the source of the problem in the surrounding space.

This makes Oxify useful for bathrooms, toilets, wardrobes, cars, cabinets, enclosed rooms and newly renovated spaces.

Key Benefits

Treats hard-to-reach mould-prone areas
Helps reach ceilings, upper walls, damp corners and enclosed areas without direct spraying.

Neutralizes musty odours at the source
Breaks down odour-causing compounds instead of simply masking bad smells.

Helps reduce formaldehyde and VOCs
Useful for new furniture, renovation works, cabinets, wardrobes, adhesives, flooring and enclosed rooms.

Ideal before repainting
Use as a pre-treatment before repainting mould-affected walls or ceilings.

Useful before moving into a newly renovated space
Helps reduce chemical smells and indoor air pollutants before regular occupancy.

Fast 30-minute treatment
Designed for quick enclosed-space treatment.

No wet chemical residue
No direct surface spraying and no sticky residue left behind.

Ozone-free and electronics-safe
Suitable for modern homes, vehicles, wardrobes, equipment areas and enclosed indoor spaces.

Recommended For

• Mould-prone ceilings
• Bathroom and toilet mould
• Damp corners and enclosed rooms
• Wardrobes and cabinets
• New furniture smell
• Newly renovated rooms
• Formaldehyde and VOC treatment
• Musty bedrooms or storerooms
• Cars with stale or damp odours
• Pre-treatment before repainting
• Pre-treatment before moving into a new home or office

How to Use Oxify

1. Activate

Open the Oxify sachet and drop the capsule into the blue container provided.

Add 50 ml of clean water to activate the treatment.

2. Place

Place the activated container in the affected enclosed area.

For best results, close doors, windows, drawers, wardrobes, cabinets or cabin spaces where appropriate.

Allow the oxidizing actives to circulate through the space.

3. Wait 30 Minutes

Leave Oxify to work for 30 minutes.

Where suitable, use a fan or air-conditioning circulation mode to help distribute the treatment more evenly.

4. Ventilate

After treatment, remove the container and ventilate the space before normal use.

Dispose of the used solution appropriately.

Best Way to Use for Mould Before Repainting

For mould-affected ceilings or walls:

1. Use Oxify to treat the enclosed space first.
2. Allow the area to ventilate and dry properly.
3. Wipe or clean remaining visible residue where needed.
4. Repaint only after the surface is clean and dry.
5. Improve ventilation or reduce moisture to help prevent the mould from returning.

Oxify does not replace good moisture control. It works best when used together with proper drying, ventilation and surface preparation.

Recommended to use every 3 months for mould prevention.

Best Way to Use for Formaldehyde and Renovation Smell

For newly renovated spaces, new furniture or enclosed cabinets:

1. Place Oxify in the affected room, wardrobe, cabinet or vehicle.
2. Close the space during treatment.
3. Allow Oxify to work for 30 minutes.
4. Ventilate the area after treatment.
5. Repeat treatment where chemical odours continue to return.

Formaldehyde and VOCs may continue to release from new materials over time. Oxify helps treat the air and reduce odours, while ventilation helps remove ongoing emissions from the space.

Available Options

Single Use Starter Kit

Best for first-time users who need immediate mould, odour or formaldehyde treatment.

Bundle of 3 Kits

Best for multiple rooms, bathrooms, cars, wardrobes or repeated treatment.

3 Refills Only

Best for maintenance use. Bottle not included.

Recommended for periodic use in mould-prone spaces, newly renovated rooms, wardrobes and enclosed areas.

Why Choose Oxify Instead of Normal Mould Spray?

Normal mould sprays require direct contact. That means you need to climb, spray, wipe and repeat — especially for ceiling mould.

Oxify is different.

It treats the enclosed space by releasing oxidizing actives into the air. This helps reach areas that are difficult to spray directly, including ceiling zones, corners, gaps and enclosed spaces.

For homeowners, this means a simpler and cleaner way to treat mould-prone areas before stains become a bigger problem.

Why Choose Oxify Instead of Air Fresheners or Charcoal Bags?

Air fresheners mask odours.

Charcoal bags absorb some smells slowly.

Oxify actively releases oxidizing actives to help break down musty odours, formaldehyde and VOCs in the surrounding air.

This makes Oxify more suitable for fast treatment of enclosed spaces affected by mould, renovation smell, new furniture odour or stale indoor air.

Important Notes & Safety Label

Oxify is safe, leaves no wet chemical residue and is biodegradable, making it a cleaner and more convenient option for treating mould, musty odours, formaldehyde and VOCs in enclosed spaces.

Oxify is designed for enclosed-space treatment. During activation, no people or pets should remain inside the treated enclosed space. After the 30-minute treatment, ventilate the area well before re-entering or using the space again.

Visible stains, paint damage or heavy mould residue may still require cleaning, drying and repainting after treatment.

For formaldehyde and VOCs, new materials may continue to release emissions over time. Repeat treatment and proper ventilation are recommended where odours persist.

Oxify helps reduce mould recurrence when used together with proper ventilation, drying and moisture control. 

Recommended to use every 3 months for mould prevention.